Ultra-TrackPans®
Capture Hazardous Spills From Railroad Tanker Cars
 

  • Ultra-TrackPans have been designed to provide spill containment at industrial rail sidings and locomotive maintenance facilities.  Available in virtually any length, Ultra-TrackPans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow.

  • Prevent Costly Cleanup and Regulatory Fines

  • Modular Design - Center and Side Pans are 53.5" long; containment areas can be easily assembled to any length desired

  • All-polyethylene Construction - Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from -40°F to +140°F

  • Sealed System - Polyethylene gaskets keep spills from falling between the rails and Pans.

  • Trucks and other vehicles can drive over TrackPans with grates in place.

  • Economical, easy to install

  • Modular TrackPan design can be customized to meet your specific needs.

  • Optional TrackPan Covers Keep Rainwater Out of the Pans, Providing Effective Stormwater Management.

  • Polyethylene Covers are left in place until the railcar(s) arrive to be off-loaded  or loaded.  Lightweight covers mechanically lock into the polyethylene decking and will not blow off in windy conditions.

  • Unique stormwater feature is designed to eliminate "pooling" of rain that falls on top of the Center Pan Covers; rain is channeled onto the ballast between the tracks, stays out of the Pans.


  • Ultra-TrackPans Are Available In Two (2) Models:

    TrackPans and Grates, No Covers
    TrackPans with Grates and Covers

  • Low Maintenance - unlike carbon steel track pans, Ultra-TrackPans will not rust or corrode.  Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun.

  • Slip Resistant Surfaces - Pans, grates and covers have been designed with safety in mind.  All top surfaces resist slips when wet or oily.

  • Long Work Life - Estimated to perform 20-30 years; longer than fiberglass pans.

ULTRA-TRACKPANS
TrackPans with Grates, No Covers TrackPan Covers Only
Part# 9566 - Center TrackPan with Grates Part# 9580 - Cover for Center TrackPan
Dimensions: 53½" x 53½" x 6"
(1359 mm x 1359 mm x 153 mm)		 Dimensions: 56" x 54" (1423 mm x 1372 mm)
Weight: 106 lbs. (49 kg) Weight: 24 lbs. (11 kg)
Containment Capacity: 18 gallons (69 L)
Includes: 2 bulkhead fittings, 4 gaskets 
and 2 grates
Part# 9576 - Side TrackPan with Grates Part# 9581 - Cover for Side TrackPan
Dimensions: 53½" x 27½" x 6"
(1359 mm x 699 mm x 153 mm)		 Dimensions: 56" x 27¾" (1423 mm x 705 mm)
Weight: 60 lbs. (29 kg) Weight: 11 lbs. (5 kg)
Containment Capacity: 19 gallons (72 L)
Includes: 1 bulkhead fitting, 2 gaskets 
and 1 grate
Options
Part# 9584 - Rebar Fasteners with Protective Caps (20-pack)
Part# 9559 - 3" dia. Bulkhead Fitting (for below grade piping)
Part# 9586 - Sorbent Mats, Center Pan (2/set), 10-pack
Part# 9585 - Sorbent Mats, Side Pan 20-pack
Part# 9571 - Grate Only for Center Pan (Left)
Part# 9571 - Grate Only for Center Pan (Right)
Part# 9573 - Grate Only for Side Pan
U.S. Patent Nos. 5,562,047; 6,173,856; 6,305,569
 
 
 
 

 

  
     

Home | About Us || Clients & Testmonials | Contact
Copyright ©2006 Chemtech International Inc, All Rights Reserved